The three-positional double switch, which is controlled via one control channel. RC Shutter is used for controlling the photo/video-camera or the board lights. Three regimes of operation are possible, i.e. consecutive switching on, separate switches and two triggers. The regime of consecutive switching on is assigned for controlling the functions of the photo-camera "focusing" and "shutter". The regime of separate switches is assigned for the functions "zoom in" and "zoom out" or for the "photo/video" regime switching. The regime of triggers suits for controlling the board lights. The three-positional switch, located at the control panel, is used for controlling the device. The outlets of the device are isolated from each other and from the control system. The device may switch either AC or the DC, in spite of polarity and tension. Moreover, the device can be used for switching the analogous and digital signals; for example, the video-signal.
You are welcome to read more information about the methods of usage of the device in the article:
The regime of operation of the device depends upon the position of the switch at the moment of switching the board feeding on.
If the device is switched on from the lower position, the device operates as the consecutive switch off.
If the device is switched on from the middle position, the device operates as separate switches off.
If the device is switched on from the upper position, it operates as two triggers.
The outlets of the first switch are two wires of the green color; the outlets of the second switch are two wires of the blue color.
Switching in the regime of the consecutive switch-off
Switch position
Green wires
Blue wires
Lower position
disconnected
disconnected
Middle position
connected
disconnected
Upper position
connected
connected
Switching in the regime of the separate switches
Switch position
Green wires
Blue wires
Lower position
connected
disconnected
Middle position
disconnected
disconnected
Upper position
disconnected
connected
Switching in the regime of the triggers.
Switch position
Green wires
Blue wires
Lower position
Change to opposite
no changes
Middle position
no changes
no changes
Upper position
no changes
Change to opposite
Recommended settings for the control panel:
Lower position - -90% (1.0-1.3msec pulse);
Middle position - 0% (1.3-1.7msec pulse);
Upper position - +90% (1.7-2.0msec pulse)..
Video:
The technical data The Feeding Voltage from the receiver - 5V
Max. Consumption Current - 20 mA
Max. Switching Voltage - 200V
Max. Switching Current - 1A
Max. Switching Power - 20W
Weight - 10 g
Sizes - 28x15x12 mm
The device can control two buttons of the camera; if four buttons must be controlled, two devices and two channels of the remote control must be used.
Price: 15 Euro
If You wish to pay for the goods by the bank remittance or via the Western Union, refer Your order by e-mail.
