LED panels are produced specially for HeliStrobe device. HeliStrobe device needs two panels. You can acquire two panels of the same colour or different colours. If required, each channel of HeliStrobe device can be connected to two panels in parallel (total four panels). For feeding, a two-section lithium battery of at least 1000 mA/h capacity should be used. Do not connect the panels to the battery in absence of HeliStrobe device, because they will burn out soon. To the diodes of the said panels, currents of maximal values are applied and the supply should be pulse (it is ensured by HeliStrobe device). The conductors should be connected to outputs of HeliStrobe device; no supplemental elements are required for this purpose. The red conductor corresponds to plus and the black conductor corresponds to minus. The resource of the LEDs is sufficient for hundreds and even thousands flies; however, a part of the diodes can burn out because of increased brightness. The number of LEDs on a panel is 48. If even 6 of LEDs of a panel burn out, the brightness of the light radiated will remain sufficiently bright. If the discharged or weak batteries are connected, the power, radiated by the panels, will be significantly lower than the indicated one. No warranty is provided for LEDs; however, if you detect a manufacturing defect, we'll ensure replacing.
LED Panel type L
Supply voltage (HeliStrobe)- 7,2-8,4 V
Dimensions - 230x10x6 mm
Weight - 10 g
The diodes with side emission are used. Fix the panel in such a way so that the board screens the light, illuminated downwards and sideward.
|
Colour
|
Consumption current (average/pulse), A
|
Pulse electric power, W
|
Price
|
Order
|
|
RED
|
1,1/2,4
|
16
|
9 Euro
|
|
|
AMBER
|
1,1/2,4
|
14
|
9 Euro
|
|
|
YELLOW
|
1,1/2,4
|
15
|
9 Euro
|
|
Soon the panels in different color will be available.
